ヘリモンスター | ドローン | DOGCOM | HAPPYMODEL | BETAFPV日本代理

ヘリモンスター | ドローン | DOGCOM | HAPPYMODEL | BETAFPV日本代理

NewBeeDrone AcroBee65 BLV3 BNF [NB-]

18,900円(税込)


商品の説明

The BeeBrain BLV3 BNF!
What's new? Included in the AcroBee65 BLV3 are the improved BeeBrain BLV3 Flight controller and Gold Unibell 0802 18000KV Motors.

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built in FrSky Receiver and built in video transmitter.

In addition, the ESC MOSFETs were upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC were enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range
Optimized SPI Receiver hardware to improve efficiency within the receiver.
Removable antennas.
Additional low noise amplifier to increase range.
Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc)
Video Transmitter Improvements - 120mW
New heatsink and layout to increase heat dispersion and efficiency.
Transmitting power increased to 120mW from 25mW (V2)





BeeBrain BLV3 Flight Controller Specifications
STM32F411 MCU
ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable.
ESC Specifications: 4 channel 12A ESC
Weight: 6 grams (including antennas and battery connector)
Size: Outer dimensions 29 x 29 x 7.6 mm
Holes: 25.5 x 25.5 mm
Battery input: 1 – 2 S
UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.


※受信機を選択してください。
Includes
1x AcroBee65 BLV3 BNF (SPI RX, SFHSS / FRSKY)
1x 簡易日本語説明書(双葉プロポ設定データ)
1x VTX系統図

**100g未満 ドローン

モバイルショップ