RADIOMASTER TX16S Mark II AG01 Gimbal Radio Controller (MODE2) [ ]

The best just got better! Introducing the TX16S Mark II, the ultimate open-source radio. We provide the standard TX16S Mark II radio, TX16S Mark II Max radio, TX16S Mark II Max Radio Controller (Joshua Bardwell Edition), and TX16S Mark II MAX Pro MCK Version.

Click to know more about TX16S MarkII: TX16S Mark II Radio Comparison Chart

最適化された充電 IC により、最大 2.2A の内部 USB-C 充電電流が可能になりました。
背面にオーディオ ジャックを装備し、ヘッドフォン出力を提供。
V4.0 ジンバルは、センタリングと温度安定性を改善しました (AG01 と同じ回路)。
明確な中央の戻り止めを備えた改良された S1/S2 ノブ。
改良された LS/RS スライダーは、より滑らかな感触とより優れたセンター デテントを備えています。
トレーナーソケットを標準のTRS 3.5mmソケットに変更。
パーソナライズされた改造用にリア DIY ソケットが追加されました。
利用可能な ELRS および 4in1 バージョン。

Item: TX16S Mark II
Size: 287x129x184mm
Weight: 750g (without battery)
Transmission frequency: 2.400GHz-2.480GHz
Transmitter module: Option 1: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401); Option 2: Internal ELRS (SX1280)
Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
SD card: 256MB by default, 8GB maximum
Antenna gain: 2db (transmit power adjustable)
Working current: 400mA
Working voltage: 6.6-8.4v DC
Remote control distance:> 2km @ 22dbm
Radio firmware: EdgeTX
Module Firmware: Multiprotocol- Module (4IN1) -OR- ExpressLRS (ELRS)
Channels: Up to 16 channels (depending on the receiver)
Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
Module Bay: JR compatible module bay
Upgrade method: Supports USB-C online / SD card offline upgrade

Support EdgeTX and OpenTX
EdgeTX is installed by default (Touch screen enabled).

* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.

Optional V4.0 Hall Gimbals and AG01 Gimbals
Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.

AG01 Gimbal is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning.

Flat & Raised Grips Included
Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.

Built-in dual speakers

External Module Bay
The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.

Easy Firmware Updates

Upgraded Design
Retooled faceplate with improved fit and finish
Improved S1/S2 knobs with center detents
4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.

Improved LS/RS Sliders with smoother feel and better centre-detents.

New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
Redesigned battery cover, easier to remove.
Rear DIY Socket added for personalised mods.

Radio Overview

More Options
TX16S Mark II with V4.0 Hall Gimbal or AG01 Hall Gimbal
TX16S Mark II Max V4.0 Hall Gimbal or AG01 Hall Gimbal
TX16S Mark II Max Joshua Bardwell Edition
TX16S Mark II Max Pro MCK Edition

AG01 Full CNC Hall Gimbal
Replacement HALL V4 Gimbal
21700 5000mAh Battery
TX16S Radio Carry Case Large
TX16S Foam Box Zipper Cover
TX16S Replacement Switch Assemblies (SA+SB/SC+SD/SF+SE/SH+SG)
TX16S CNC V3 Upgrade Parts Set

1 * TX16S Mark II Radio Controller (AG01 Gimbal) (4-IN-1)
1 * 18650 Tray
1 * USB-C Cable
1 * Screen Protector
1 pair of flat grips
1 pair of raised grips (installed on radio by default)
1 * TX16S Key Chain