IFLIGHT Alpha A85 w/Caddx Loris 4K Camera SFHSS [IF-C008359]



Let's welcome the iFlight Alpha series, a new way to fly FPV. Ever wanted to have a 4K Cam on the smallest possible whoop size quad? We sticked the caddx Loris 4K to one of our new 2inch whoop frames, did some tuning and tried to find the optimal ratio between weight and power. This is what we came up with to combine flight time efficiency with sufficient power.

FEATURES:
76 grams (without battery)
Butter smooth XING NANO 1303 5000KV (more torque and efficiency with longer flight times compared to 1105 motors)
Ducts to protect the sensitive environment or yourself
Pre-tuned with smooth cinematic settings
iFlight Albatross 5.8G RHCP light antenna upgrade (included)
iFlight Albatross 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)


Alpha A85 w/Caddx Loris 4K Camera BNF Specs:

SucceX-D 20A Whoop F4 AIO Board
XING 1303 5000KV FPV Micro motor
Wheelbase: 85mm
Body size: 125*125mm
Ducted propeller size: 2 inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Weight: 76.5g (without battery)
Flight time: 5-7 min cruising (4S 450mAh)


FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

FC // SucceX-D 20A F4 Whoop AIO
Size:30.5x30.5mm
Mounting pattern:25.5x25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
Blackbox:8MB
BEC output:5V 2A/10V 2A
INA pad:UART2 (nR2)
Barometer:no
Constant current:20A,25A(Burst)
Input:2-4S
Current sensor:yes
BLHeli:BLHeli-S
ESC Telemetry:no
Target:IFLIGHT_F411_PRO
ESC Firmware:G-H-30 BLS


【セット内容】
Alpha A85 w/Caddx Loris 4K Camera SFHSS
1x AC900
1x Alpha 85mm Frame
1x Caddx Loris 4K Camera
1x 5.8G SucceX Micro Force VTX 300mW
1x iFlight Albatross RHCP 5.8g light antenna
2sets HQ 2 inch 4-blades (Set of 4 - Color May Vary)
1x iFlight Lipo Strap

※こちらの商品は、発送前にホバリングまでのテストを致しております。



〜AC900について〜
【バインド方法】
1.バインドボタンを押したまま、プロポの電源を入れる
2.LED点灯→バインド完了

【FUTABA S-FHSSとFRSKYの切り替え方法】
1.受信機の電源を入れる。
2. バインドボタンを爪楊枝などを使って長押しする(5〜10秒くらい)。長押ししている間一瞬ライトが光り、その後点灯すれば切り替え成功です。
3.再度行うと、違うモードに切り替えになります

この商品を買った人はこんな商品も買っています