EWRF008 5.8G 40CH VTX 25mW/200mW/600mW Pitmode []

Specifications
Model: Brown bear 008
Frequency: 5.8G 40CH
Transmitting Power:25mW/200mW/600mW/OFF(Pitmode)
Power supply:DC7V-24V
Current(12v):120mA(25mW)/180mA(200mW)/300mA(600mW)
Weight: 3.3g
Standard size:27*27*4.8mm

Main Features
Adjustable 4 modes:25mW/200mW/600mW/OFF
Betaflight/Cleanflight OSD configuring parameter
Clean powerup and channel switching without interference to others

User Guide
1. LED indication
The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands, flashing 3 times means selecting the power levels).
The blue LED indicates the state of Pitmode or the value of item when setting theVTX( e.g. when selecting the channels, 3 times of flashing means channel 3. When selecting the bands, 3 times of flashing means band C.As for the item of power levels,3 times of flashing means at the power level of 600mW).

2. Working mode indication
After powering up, the red & blue LEDs will signal the following three items of VTX in turn: channel, band and power level(the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes.

Normal: The red & blue LED are on.

Pitmode:The red LED is on and blue LED is off.

3. Setting
Press and hold the button until the red LED flash 1 timewhich means the item of channel selecting, then press the button can select the channels(blue LED flashing times corresponds to the channel 1-8).

Press and hold the button again,the red LED will flash 2 timeswhich means the item of band selecting, then press the button can select the band(blue LED flashing times corresponds to the band A-E).

Press and hold the button again,the red LED will flash 3 timeswhich means the item of power level selecting, then press the button can select the power(blue LED flashing times corresponds to the power level).

Finally, press and hold the button, save and exitthe setting of VTX(This step is essential for setting).

Press the button twice will toggle the ON/OFF of Pitmode.

Package:
1x EWRF008 5.8G 40CH VTX
1x Cable
1x Antenna
VTX系統図

この商品を買った人はこんな商品も買っています