IFLIGHT ProTek25 4S CineWhoop Analog BNF SFHSS [IF-C009161]








Our all new 2.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here...

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our popular XING 1404 motors in a higher kv class will give you all the power you need to get good speed, do some freestyle or carry a full GoPro through tiny gaps.

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

Features:
No Props or frame in view!
Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
High performance SucceX-D 20A Whoop F4 AIO Board to save weight and space
T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

Low Resonance frame construction (Less Jello, more Cinematic footage)
Butter smooth XING 1404 5500KV motors
Pre-tuned with smooth freestyle settings

PRE-TUNED & PRE-SETUP:
Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"


【仕様】
SucceX-D 20A Whoop AIO
Motor: XING 1404 5500KV
Wheelbase: 114mm
Body Size: 91*68.7mm
Bottom plate thickness: 3mm
Top plate thickness: 2mm
Top and bottom plate spacing: 24mm (aluminum standoff height)
Propeller size: 2.5 inch
FC pattern: 25.5*25.5mm / 20*20mmmm
FPV cam spacing: 20mm
Weight: 194.3g (without battery)

FC // SucceX-D 20A F4 Whoop AIO
Size:30.5*30.5mm
Mounting pattern:25.5*25.5mm/φ3mm
Connector:Micro-USB
MCU:STM32F411
Gyro:MPU6000
Blackbox:8MB
BEC output:5V 2A/10V 2A
INA pad:UART2 (nR2)
Barometer:no
Constant current:20A,25A(Burst)
Input:2-4S
Current sensor:yes
BLHeli:BLHeli-S
ESC Telemetry:no
Target:IFLIGHT_F411_PRO
ESC Firmware:G-H-30 BLS

VTX// SucceX Micro Force 5.8GHz 300mW VTX Adjustable
Power: PIT/25/100/200mW/300mW
Antenna interface: IPEX (UFL)
VTX protocol : IRC Tramp
Size: 13.5x14.5mm
Weight: 1.4g

Battery 4S 850mAh (おすすめバッテリー別売り)

【セット内容】
IFLIGHT ProTek25 CineWhoop Analog BNF SFHSS
1x AC2000(RX)
1x ProTek25 Frame
1x Caddx.us Turbo Eos V2 FPVCam 2.1mm 16:9 NTSC
1x Albatross LHCP 5.8g antenna
2x Nazgul 2525 propeller (Set of 4 - 色は画像と異なる場合があります)
2x iFlight Lipo Strap 15x200mm (色は画像と異なる場合があります)
1x Naked GoPro TPU bottom stand black (Naked GoPro Protector not included)
1x 系統図

--------------------------------------------------------------------------------
※機体に付いている受信機(AC2000)について
こちらの受信機は、FUTABA S-FHSSとFRSKY D16を切り替えることによって両方のシステムをご使用頂けます。

【FUTABA S-FHSSとFRSKYの切り替え方法】※発送時は FUTABA S-FHSS
1.受信機の電源を入れる。
2. バインドボタンを爪楊枝などを使って長押しする(5〜10秒くらい)。長押ししている間一瞬ライトが光り、その後点灯すれば切り替え成功です。
3.再度行うと、違うモードに切り替えになります

この商品を買った人はこんな商品も買っています