TWIG Mutant 4'' Toothpick Quad [BF-00313714]

1506 3000KVモーターと4032 3ブレードペラ、TWIG Mutant 4''インチのToothpick Quadは、非常に優れた飛行力で最高の状態で作られ、Betafpvでリリースされた最初の軽いレーシングToothpick Quadでもあります!
1506モーターの見た目は変更されていますが、以前のバージョンと同じ工場で製造されています。

【仕様】
Item: TWIG Mutant 4''
Weight: 148.3g (Excluded battery)
FC&ESC: Toothpick F4 2-4S AIO FC 20A(BLHeli_S) V3
Motors: 1506 3000KV Brushless Motor
Props: Gemfan 4032 3-Blade Props
Camera: Caddx Ratel Camera
VTX: A01 25-200mW 5.8G VTX
Frame: TWIG Mutant Frame
Canopy: Canopy for Mini Cam V3 Black
Receiver Option: Frsky FCC/ Frsky LBT /TBS Crossfire
Battery: 4S battery, like 450mAh 4S battery/850mAh 4S battery (Excluded)
Flight time: With the 850mah 4S Battery, we can get 7:30mins on smoothly flight, and 4:00mins for insane flight

Motor
RCINPower 1506 3000KV Motor-Rated at 3000kv, this 1506 motor hits the nice spot for the high-powered 4S 4'' toothpick builds and is with the ability to swing up to 4" props with ease.

Please note, the appearance of 1506 motor is changed, but it is made from the same factory as the previous version.


Flight Controller
Toothpick F4 2-4S AIO FC 20A(BLHeli_S) V3 - This board can handle 20A continuous current(25A burst) well. Add 8M Flash chip for Betaflight Black Box. With 3 full UARTs (UART1, UART2 and UART6), pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire.


Camera & VTX
The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

TWIG Frame
The TWIG MUTANT 4 is a mutated TWIG frame that Racer X FPV has made some exciting new changes to as they did the new TWIG XL line up of frames. The frame is premium 3mm thick high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm. The frame is 160mm motor post to motor post and swing up to 4'' props.

Canopy
Canopy for Mini Camera V3 version- MINI V3 canopy has a holder hole in the front, but not on MINI V2 canopy. It is suitable for all mini cameras which are the 19*19mm or 20*20mm FPV cameras, like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3.

【セット内容】
1x TWIG Mutant 4'' Toothpick Quad
4x Gemfan 4032 3-Blade Props
1x 系統図

この商品を買った人はこんな商品も買っています