X-Knight 4'' FPV Toothpick Quad FUTABA SFHSS [BF-00313692]

この軽量のX-Knight 4インチクワッドはわずか130gで、バッテリーを搭載しても250g未満であり、4インチドローンとしてもとてもパワフルです。


Bullet Point
The lightweight 4-inch toothpick below 250g even if you connect with the battery, meet the current requested of FAA rules.
Assembled 4'' frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents.
Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control.
Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want.

【仕様】
Weight: 129.6g (without battery)
FC&ESC:20A Toothpick F4 2-4S AIO FC
Motors: 1505 3600KV Brushless Motors
Props: HQ 4025 2-Blade Props
Camera: Caddx Ratel Camera
VTX: A01 25-200mW 5.8G VTX
Frame: X-Knight Carbon Fiber 4'' Frame Kit
Canopy: Canopy for Mini Camera V3
Receiver : Futaba S-FHSS
Flight time: 3:30-7:30mins with XT60 4S battery


Flight Controller
Toothpick F4 2-4S 20A AIO FC- The first quadcopter installs all-in-one 20A Toothpick FC, which can handle 20A continuous current(25A burst) and provide with massive levels of performance capability while still maintain ultralight only 6.63g. Possesses a high-performance STM32F411CEU6 processor and tuned Betaflight MATEKF411 (MK41), which provides much more power on 4S.


Motors
1505 3600kv motor hits the nice spot for high-powered 4s 4'' toothpick builds with the ability to swing up to 4" props with ease. Combined with 20A Toothpick F4 AIO FC, which will provide you enough output power.


Camera & VTX
The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.


【Camera仕様】
Image Sensor: 1/1.8" Inch starlight HDR sensor
Horizontal Resolution: 1200TVL
FOV: 180 Degree
Min. Latency: 8ms
TV System: NTSC & PAL (changeable)
Image: 16:9 & 4:3 (changeable)
WDR: Super WDR (HDR)
Min. Illumination: Starlight
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Camera OSD: Separate OSD
DNR: 3-DNR

【VTXの仕様】
A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

Output power: 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Frequency: 5.8GHz 6 bands 37 channels
X-Knight Carbon Fiber 4'' Frame Kit
Our first assembled 4'' frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g. It consists of arms, bottom plate and top plate, which allows you to replace the damaged part. Meanwhile, the top plate comes with press nuts to make the installation process easier.


【セット内容】
1x X-Knight 4Inch Toothpick FPV Quad
1x HQ 4025 2-Blade Props (4pcs)
1x Set of M2*7 screws

★機体に付いている受信機(AC900)★について
こちらの受信機は、FUTABA S-FHSSとFRSKY D16を切り替えることによって両方のシステムをご使用頂けます。

【FUTABA S-FHSSとFRSKYの切り替え方法はこちら】※発送時は FUTABA S-FHSS

U199(200g未満)



この商品を買った人はこんな商品も買っています