HX100 SE FPV Quad (BT2.0/FUTABA) [BF-00313639-4] (VX08)

超軽量、静かで強力! 100mmホイールベースとBT2.0 300mAh 1Sバッテリーの小さなボディでパワフル!!

最も軽いF4 1SブラシレスFC V2.1を使用、ケーブルなしの重量は2.69g
FCは、効率的なSTM32F411CEU6プロセッサーと調整されたBetaflight MATEKF411RX(MK41R)を備えており、最大の重量削減を達成!
ライト1102 13500KVモーターと耐久性のある65mm 2ブレードプロップの高効率の組み合わせにより、ドローンは優れた飛行性能を発揮し、ノイズ低減機能を実現します
総重量28.09gの超軽量で、カスタマイズされたHX100 SEカーボンファイバーフレームを取り付けます。質感と耐久性のある素材で作られ、マット加工されています

Item: HX100 SE FPV Quad
Weight: 28.09g (without battery)
FC&ESC: F4 1S Brushless FC V2.1
Motors: 1102 13500KV Motors
Props: Gemfan 65mm 2-blade props(1.5mm shaft hole)
Camera & VTX : M01 AIO Camera 5.8G VTX
Frame:HX100 SE Carbon Fiber Frame
Canopy: Canpy for HX100 SE
Receiver Option: Frsky XM / DSMX / Futaba S-FHSS
Battery: BT2.0 300mAh 1S Battery
Flight time: 4 mins in a smooth outdoor flight, 2:30 mins in full throttle outdoor flight
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(15A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag. For more instruction, click here to reach.

There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.

F4 1S Brushless FC V2.1 - The lightest 1S brushless FC in the current market. With slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness.

CPU: STM32F411CEU6 ( 100MHZ )
Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
Size: 29mm x 29mm, fully compatible with the whoop frame in the current market.
Firmware version: Betaflight MATEKF411RX (MK41R)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Power Cable: 60mm, with BT2.0 connector, 1.25mm motor header pins

Power supply: 1S
Current: 5A continuous and peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM

Customized 1102 13500KV motor - With an ultra-light weight of 3.01g and adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of motor and improved its efficiency.

The M01 AIO camera is with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna. It has both fast response and clear image.

What's more, M01 vtx board is super light and perfectly suitable for HX100 SE canopy. SmartAudio is supported. Comes with 25° and 35° camera tilts mount in default, 35° mount is suitable for high-speed flight, while 25° mount is for lower speed flight.

Output power: 25mW
FOV: H:120°/V:100°
Video System: NTSC
Horizontal Resolution: 640X480 1/4”
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Note: How to change the frequency or output power via remote control, please check the manual Smart Audio. Download the STL file for the customized HX100 SE canopy.

1x HX100 SE FPV Quad
1x BT2.0 300mAh 1S Battery
1x BT2.0-PH2.0 Adapter Cable
1x 簡易日本語説明書(双葉プロポ設定データ)
1x 系統図