NR502T-S FPV drones Micro receivers Futaba SFHSS compatible [HJ]

1) Super small size
2) Super light 1.6g
3) All NR502T series receivers can be used on any F4 and F7 flight control board with or without signal inverter.
4) Can connect and work on any serial port of F4 and F7 flight control board;
5) IPEX4 antenna plug;
6) Diversity antenna provides best range and best radio frequency performance!
7) Supports data-back function (Note: B1 version doesn’t support this function as it is limited by its protocol)
8) Supports working temperature measurement;
9) Supports RSSI output;
10) Supports reversed SBUS
11) Supports normal or reversed FPort

Binding operation:

Press the binding switch after NR502T receiver is powered, it enters binding mode after 2 seconds when the slow flashing red
LED turns to fast blinking. Then bind the receiver according to the transmitter manual. When the fast blinking red LED turns to solid
bright, it indicates binding is successful.


1x NR502T-S FPV drones Micro receivers