CineBee 75HD 2S-3S Whoop(Turtle V2) SFHSS BNF [IF-C006478]

iFlight CineBee 75HD is the latest BNF creation of minimum weight at a spectacular performance, traditional but versatile and upgradeable design, carrying a 1080p (up to 60fps) micro cam stack and recording JELLOFREE footage flying through smallest gaps and spots. If slow cruising or fast racing, the cam angle goes from 0-55 degrees with motors from 2S-4S.

Our target was pretty clear, create a lightweight, durable but jellofree whoop that can shoot high-quality HD videos. We decided to use a combination of carbon, plastic, and TPU to have a rigid bottom plate that doesn't oscillate, with still crash resistant abilities and integrated prop guards giving the whole frame strength. The stack is soft-mounted, the cam is soft-mounted, the motors run smooth - keep your props in a good condition, and you won't have to worry about jello!


- Ultra-light but high performance
- JELLOFREE durable carbon/plastic construction
- No props or prop guards in view
- Upgradeable, versatile, futureproof

【仕様】
Total Dimensions: 110x93x30mm
Frame Wheelbase: 75mm
Build Weight: 66.2g
SucceX Micro 16x16 Tower 2-4S
iFlight 1103 motors (1.5mm shaft)
Caddx.us Turtle v2 HD FPV cam
Gemfan 1635 40mm 3/4 blade OR HQ 1.6x1.6x4
iFlight Prop Guards 40mm

SucceX Mirco F4 Flight Tower System 16x16mm

SucceX F4 Flight Controller

-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target : MATEKF411

SucceX Mirco 12A Brushless ESC

-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC : None
-ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g

SucceX Mirco VTX

-Power : PIT/25/100/200mW
-Antenna interface : IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g

Motor kV Variants:

-We offer several motor setups to fit your desired performance, equipment or just preference.
-(2S), (3S) will be available.

SD card insert and ejection:

-The HD cam PCB is conveniently placed under the frame, protected by a cover.
-To insert or eject the SD card, please push in the SD card and gently slide beside the security plastic guard.

VTX control implementation:

-VTX can be conveniently set up in your OSD.

Propeller recommendation:

-Gemfan for general use, durable prop, crash resistant!

-HQ for video recording, JELLOFREE, better throttle management, NOT crash resistant!

Receivers :

【セット内容】
1 x CineBee 75HD (SFHSS and FRSKY D16用BNFバージョン)
1 set Gemfan 40mm props
1 set HQ micro whoop props
1x 簡易日本語説明書

※こちらの商品には系統図は付属致しません。



KW:CineWhoop KW:Tinywhoop

この商品を買った人はこんな商品も買っています