QAV-CODERED MINI FPV QUADCOPTER 3INCH BLOWOUT [QAV-]

The Lumenier QAV-CODERED Mini FPV Quadcopter is a mini stretched X designed for 3" propellers. It is an ultra-durable Mini FPV Racing quadcopter, and it is a ton of fun to fly. The Lumenier QAV-CODERED was created in collaboration with and named after Cody Matson AKA CODERED. This airframe has been uniquely designed to fully protect all the sensitive electronics in a compact and lightweight package.

The QAV-CODERED features premium Lumenier carbon fiber with a beautifully finished chamfered edge, giving the quad a sleek look while also improving the durability by removing hard edges. Each plate is sealed with a layer of clear coat paint further strengthening each piece and giving it an awesome finished look. No rough edges or carbon dust to worry about, and no sanding required.

The airframe has a solid 3mm carbon fiber unibody main plate and 3mm thick vertical side plates. The vertical side plates have slots that lock into place on the main plate and then secure to each other with 4x 25mm red textured aluminum spacers. The final result is an extremely solid airframe that can handle the abuse of FPV crashes like no other. Each side plate is covered by a red vinyl plastic that acts as a barrier against debris from damaging your electronics inside. Plus it just looks cool!

Even though the QAV-CODERED has been designed for 3" propellers, it has space for a full sized FPV camera and video transmitter. No need to sacrifice on video quality with a micro AIO system with the CODERED, you can use the same electronics you use in your full size 5" quadcopters. The main unibody plate is designed to hold a 20x20mm hole patterned flight controller and 4-in-1 ESC stack. The kit also includes a no-slip silicone sticker pad for secure lipo battery mounting. The motor mounts are designed to fit 13xx and 14xx sized motors with M2 screws. The recommended setup would include 1406 sized motors in the 3500-3800kv rage running on a high C rated 4s Lipo battery with 3 bladed 3" propellers.

【仕様】
Designed in partnership with Lumenier FPV Pilot CODERED
Full 3K Carbon Fiber airframe
Ultra durable 3mm vertical side plates
Full FPV Camera protection
Mini sized for 3" propellers
Black Oxide steel screws
Easy grip red anodized spacers
"Bumpers" on the end of the arms to protect the motor during a crash
Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
Lightweight and rigid
WEIGHT
Airframe: 47g (airframe + hardware)

【セット内容】
1x QAV-CODERED Mini FPV Quadcopter
3mm carbon fiber unibody main plate
2mm carbon fiber top plate
2x 3mm carbon fiber vertical side plates
2x 1mm carbon fiber nose cover plates
2x Red laser-cut plastic side covers
1x Set of black steel screws and aluminum hardware including knurled spacers, cable ties
1x No-slip silicone battery pad
1x XT-30 Pig-Tail
1x Lumenier small rubber grip lipo strap

この商品を買った人はこんな商品も買っています

    カテゴリーから探す

    コンテンツ