TBS UNIFY PRO 5G8 V3 25mW-800mW Video Transmitter (V3 Edition / 4.5-5.5V / SMA-JACK) [TBS-017]





New in V3:
Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3

Main features
Smallest, lightest video transmitter on the market
Up to 800mW of output power
Ultra-clean transmission (up to 16 pilots at once!)
PitMode - power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
CE certified

PitMode - Made to race
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels.

SmartAudio V2 - Full control
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!

CleanSwitch - Neighbor friendly
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)

Say NO! to Dipswitches
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.

【仕様】
動作電圧:4.5〜5.5V
供給電流:600mA
動作温度:通常の気流を監視する
オーディオキャリア周波数:6.5MHz
ビデオ入力インピーダンス:75オーム
重量:5g(SMA、アンテナなし)
アンテナコネクタ:SMAメスソケット、ネジ取り付け穴付き
ビデオフォーマット:NTSC / PAL
出力電力:13dBm(25mW)、23dBm(200mW)、27dBm(500mW)、29dBm(800mW *)

【セット内容】
TBS UNIFY 5G8 Video transmitter
5V Video Transmitter pigtail cable
TBS UNIFY Pro Manual
CE Certification
Declaration of Conformity

注意:※ 当商品は国外でご使用されるお客様向けに販売致しております。

注意:
TXアンテナをオンにする前に、アンテナが取り付けられていない状態で電源をオンにするか、不適切なアンテナを使用してVTXを簡単に焼損させる可能性があります。 アンテナはVTXの熱を減らすのに役立ちます。そのため、不適切なアンテナを使用するとVTXが容易に焼損することがあります。
カスタマイズされた作業(デフォルトのRP-SMA / SMAコネクタを取り外し、VTX上に薄いアンテナをはんだ付けするなど)は、VTX上で過熱を起こしてICを焼損させる可能性があります。

カテゴリーから探す

コンテンツ